Roland V-Accordion FR-18 diatonic - Editing Function Parameters

Parameters
V-Accordion FR-18 diatonic r
43
Parameters
All parameters except “MIDI OUT/IN” can be saved in the
Global area (common to all Sets).
NOTE
The small dot “•” means “factory setting”.
Master Tune
This parameter allows you to change the FR-18
diatonic’s overall tuning. The factory default, “440”,
represents the reference pitch used by all electronic
musical instruments. The settings you can select with
the registers are:
Musette Detune
This parameter allows you to choose the system used
for detuning the 8’ reeds of the selected register. The
settings you can select with the registers are:
Treble/Bass&Chord Balance
This parameter is used to set the balance between the
Treble and Bass sections. When you press register [1],
the treble section is inaudible, while pressing register
[4] means that the bass and chord section is no
longer audible. The settings you can select with the
registers are:
NOTE
See also “How to balance the various sections” on p. 31.
Orchestra/Organ Level
This parameter allows you to set the level of the
orchestral sounds. It can be useful to create the
desired “mix” (volume balance) with the treble accor-
dion sounds.
Orchestra Bass Level
This parameter allows you to set the level of the
orchestral bass section. It can be useful to create the
desired “mix” (volume balance) with the sound
assigned to the chord section (page 29).
Orchestra Chord Level
This parameter allows you to set the level of the
orchestral chord section. It can be useful to create
the desired “mix” (volume balance) with the sound
assigned to the bass section (page 29).
Drum Set
This parameter allows you to select the type of drum/
percussion instruments you wish to play simulta-
neously with the bass and chord section. See also
“Playing drum/percussion sounds” on p. 30.
415~440~466 (Hz) Default setting: 440
Register Value Register Value
1 415 3 448
2• 440 4 466
Dry, Classic, F-Folk, American L,
American H, Nord Eur, German L,
D-Folk L, Italian L, German H,
Alpine, Italian H, D-Folk H, French,
Scottish
Default setting:
Depends on the selected
Set
Register Value Register Value
1 Classic 3 Italian L
2 Nord Eur 4 French
Bass & chord 1~63,0, 1~63 Treble Default setting: 0
Register Value Register Value
1 Bass &
Chord (60)
3 Treble 30
2• Equal
balance (0)
4 Treble 60
1
2
3
–40~0~+40 Default setting: 0
Register Value Register Value
1 –40 3 +20
2• 0 4 +40
–40~0~+40 Default setting: 0
Register Value Register Value
1 –40 3 +20
2• 0 4 +40
–40~0~+40 Default setting: 0
Register Value Register Value
1 –40 3 +20
2• 0 4 +40
Folk, Jazz, Tarantel, Latin Default setting: Folk
Register Setting Register Setting
1• Folk 3 Tarantel
2 Jazz 4 Latin
4
5
6
7
FR-18d GB.book Page 43 Wednesday, December 15, 2010 1:54 PM