16
Getting ready
3.
Connect the piano pedals to the PIANO PEDAL connector located on the rear panel of the instrument.
4.
Attach the headphone hook included with the KS-V8.
Insert the headphone hook into the hole located on the bottom of the instrument toward the left side, and fasten it by tightening the
wing nut.
Only headphones should be placed on the headphone hook. If you use it to hold other objects, you risk damaging the
instrument or the headphone hook.
If you need to remove the instrument from the stand, detach the headphone hook first.
5.
Secure the piano pedal cable, power cord, and other connection cables inside the stand’s cable covers.
V-Piano_e.book 16 ページ ２００９年１月２８日 水曜日 午前９時１０分
To Next Page
Loading...
