Roland V-Piano - Copying a Setup File (Copy SETUP File)

91
Detailed settings for various functions (Utility screen)
Here’s how to copy a setup file from the V-Piano’s internal memory to USB memory (sold separately).
You can also copy a setup file from USB memory to the V-Piano’s internal memory.
1.
In the File screen, turn the [VALUE] dial to select “Copy SETUP File,” and press the [ENTER] button or the [F1
(ENTER)] button.
fig.UtilFileCop01.eps
2.
Press the [F1 (DEST)] button to specify how copying is to occur.
3.
Turn the [VALUE] dial to select the setup file(s) to be copied.
fig.UtilFileCop02.eps
If you choose “ALL,” all setup files will be copied.
4.
To copy the selected file(s), press the [F4 (EXECUTE)] button.
While files are being copied, the screen will indicate “Executing...” Never turn off the power during this time.
If a file of the same name already exists, the confirmation message “Overwrite OK?” appears. If you want to overwrite the
existing setup file, press the [F4 (OK)] button. If you want to cancel the copy, press the [F1 (CANCEL)] button.
5.
When copying is completed, press the [EXIT] button to return to the previous screen.
Copying a setup file (Copy SETUP File)
Value
Description
INT → USB
Copy from the V-Piano’s internal memory to USB memory.
USB → INT Copy from USB memory to the V-Piano’s internal memory.
V-Piano_e.book 91 ページ ２００９年１月２８日 水曜日 午前９時１０分