Roland V-Piano - Editing the Stretch Tune

54
Customizing the V-Piano’s sounds
The stretch tune settings allow you to make detailed adjustments to the tuning curve.
1.
Assign Stretch Tune (STRETCH) to one of the [F1]–[F4] buttons and select it.
2.
Press the [ENTER] button to access the Stretch Tune edit screen.
fig.Stretch01.eps
If you use the [F2 (Key)] button to edit the tuning of a specific key, the Lower type will automatically change to “User” for
G#4 or lower keys and the Upper type for A4 or higher keys.
Editing the stretch tune
Function Button Description
[F1 (Lower)]
Specifies the tuning curve for the lower region.
• Gentle: Draws a curve that is shallower than “Standard.”
• Standard: Draws a typical curve.
• Deep: Draws a curve that is deeper than “Standard.”
[F2 (Key)]
Press the [F2 (Key)] button and then press a key; now you can use the [VALUE] dial to adjust the pitch of that key.
The range of adjustment is -50–+50 cents.
[F3 (Upper)]
Specifies the tuning curve for the upper region.
• Gentle: Draws a curve that is shallower than “Standard.”
• Standard: Draws a typical curve.
• Deep: Draws a curve that is deeper than “Standard.”
[F4 (Reset)] Cancels the changes and sets the tuning curve to Standard.
V-Piano_e.book 54 ページ ２００９年１月２８日 水曜日 午前９時１０分