Roland V-Piano - Initialize and Factory Reset

98
Detailed settings for various functions (Utility screen)
fig.UtilInit01.eps
Here’s how to delete a specific user tone.
1.
In the Initialize screen, turn the [VALUE] dial to select “Delete User Tone,” and then press the [ENTER] button or
the [F1 (ENTER)] button.
fig.UtilInit02.eps
2. Turn the [VALUE] dial to select the user tone that you want to delete.
fig.UtilInit03.eps
3. To delete the selected user tone, press the [F4 (EXECUTE)] button.
4.
A confirmation message will appear. To delete the user tone, press the [F4 (OK)] button.
fig.UtilInit04.eps
If you decide to cancel without deleting, press the [F1 (CANCEL)] button.
The screen will indicate “Executing... Don’t Power OFF” while the user tone is being deleted. Never turn off the power during this
time.
5.
When deletion is completed, press the [EXIT] button to return to the previous screen.
Restoring the factory settings (9. Initialize)
Deleting the user tones (Delete User Tone)
V-Piano_e.book 98 ページ ２００９年１月２８日 水曜日 午前９時１０分