Roland V-Piano - Using the USB Memory; Connecting the USB Memory

24
Getting ready
You can copy Setup files (p. 87) and song files to separately sold USB memory for safekeeping.
You can also play back SMF music files that are saved on USB memory, or play audio files from USB memory (p. 64).
1.
Connect your USB memory to the USB MEMORY connector located on the V-Piano’s front panel.
Carefully insert the USB memory all the way in, until it is firmly in place.
If you’re using new USB memory, you must first initialize (format) it on the V-Piano. For details, refer to “Formatting internal
memory or USB memory (Format)” (p. 95).
Using the USB memory
Connecting the USB memory
V-Piano_e.book 24 ページ ２００９年１月２８日 水曜日 午前９時１０分