97
Detailed settings for various functions (Utility screen)
fig.UtilVLINK02.eps
V-LINK function chart
V-LINK function
Transmitted MIDI message V-Piano operation Remarks
Switch images
CC#0: 00H–7FH
CC#32: 00H–7FH
Play black keys
When V-LINK Mode is BANK/PC.
Number depends on Lowest No.
Program Change: 0–127 Play white keys
Note: A0–C8 Play keys
When V-LINK Mode is NOTE.
Number depends on Lowest No.
V-LINK Settings
Parameter
Description Value Default Value
V-LINK Switch
Turns the V-LINK functionality on/off.
This parameter is linked with the [V-LINK]
button.
OFF, ON OFF
V-LINK Mode
Selects the type of MIDI messages that will be
transmitted. You can choose between
transmitting bank select and program
change messages (BANK/PC) or note
messages (NOTE).
BANK/PC, NOTE BANK/PC
V-LINK Tx Channel
Specifies the MIDI channel on which MIDI
messages will be transmitted.
1–16 10
Key Range
Selects the range of keys that will be used as
V-LINK controllers. You can also specify this
range from the keyboard by pressing the
bottom key, then the top key, and then
[ENTER] button.
A0–C8 A0–G#1
Lowest No.
Specifies the number that will be transmitted
when you press the lowest key of the Key
Range.
1–128 (When V-LINK Mode is BANK/PC),
0–127 (When V-LINK Mode is NOTE)
1 (When V-LINK Mode is BANK/PC),
0 (When V-LINK Mode is NOTE)
Local Switch
Specifies whether the V-Piano will (ON) or
will not (OFF) produce sound when you play
a key in the specified Key Range.
OFF, ON OFF
V-Piano_e.book 97 ページ ２００９年１月２８日 水曜日 午前９時１０分
To Next Page
Loading...
