Roland VS-1680 - Page 151

151
Chapter 10 Track and Phrase Editing
Chapter 10
1. Press [PLAY (DISPLAY)].
2. Hold down [SHIFT] and press [F2 (TRACK)].
3. Press [F1 (Tr/Ph)] so that the Phrase Edit Menu appears.
4. Press [PAGE] so that [F2] indicates “Split,” and then
press [F2 (Split)].
5. Press [F1 (SelPh)].
6. Press the [STATUS] button for the phrase that you wish
to divide. The STATUS indicator will light in red. Or, if
you prefer, you can use [ ], [ ], [ ] and
[ ] to move the cursor to the phrase that you wish to
divide, and then press [F3 (MARK)] or [YES].
By pressing [F2 (ALL)], you can mark or unmark all phrases
simultaneously.
7. Press [F1 (Back)].
8. Use [ ], [ ], [ ], and [ ] to move the
cursor, and use the TIME/VALUE dial to set the
parameters.
Type
Select how the phrase will be divided. In this case, select
“Divide.”
Divide : Automatically divide the phrase into two or
more phrases.
Split : Manually divide the phrase into two separate
phrases.
IN Threshold
Specify the volume (-84-6 dB) that will be used when
searching for the point at which the phrase begins to sound.
The VS-1680 will search for a point that exceeds this level.
IN Margin
Specify the length of time (0.1–9.9 sec) that will be preserved
before reaching the “IN Threshold.”
OUT Threshold
Specify the volume (-84-6 dB) that will be used when
searching for the point at which the phrase stops sounding.
The VS-1680 will search for a point that falls below this level.
OUT Margin
Specify the length of time (0.1–9.9 sec) that will be preserved
after reaching the “OUT Threshold.”
IN Threshold
IN Margin
When IN Margin is short
When IN Margin is long