Roland VS-1680 - Page 152

152
Chapter 10 Track and Phrase Editing
9. Press [F4 (Exec].
10.When the display indicates “Complete,” press
[PLAY (DISPLAY)]. You will return to Play mode.
Splitting a Phrase into Two Parts
(Phrase Split)
This operation divides a phrase into two parts at the
specified location (time) in the time axis.
1. Press [PLAY (DISPLAY)].
2. Hold down [SHIFT] and press [F2 (TRACK)].
3. Press [F1 (Tr/Ph)] so that the Phrase Edit Menu appears.
4. Press [PAGE] so that [F2] indicates “Split,” and then
press [F2 (Split)].
5. Press [F1 (SelPh)].
6. Press the [STATUS] button of the phrase that you wish to
split. The STATUS indicator will light in red.
Alternatively, you can use [ ], [ ], [ ], and
[ ] to move the cursor to the phrase that you wish to
split, and press [F3 (MARK)] or [YES].
By pressing [F2 (ALL)] you can mark or unmark all phrases
simultaneously.
7. Press [F1 (Back)].
8. Use [ ], [ ], [ ], and [ ] to move the
cursor, and use the TIME/VALUE dial to set the
parameters.
Type
Select how the phrase will be divided. In this case, select
“Split.”
Divide: Automatically divide the phrase into two or
more phrases.
Split: Manually divide the phrase into two separate
phrases.
OUT Threshold
OUT Margin
When OUT Margin is short
When OUT Margin is long
Time
Time
To