4—VGA Main Display Universal Elements
36 www.Roland.com Roland VS-2000 Owner’s Manual, Version Two Addendum
4. TUNER (TUN)
5. USB storage
6. Automix Controls
7. UNDO/REDO
8. EXT SYNC
9. Metronome
10. A.PUNCH
Click TUNER to open the CHROMATIC TUNER window. You can use it
to make sure your instruments are precisely in tune.
Click USB to open dialog to switch the system to USB storage mode.
Click:
•
AUTOMIX
—to turn the Automix feature on or off.
•
Automix Record
—to start or stop recording Automix data.
•
SNAPSHOT
—to take a snapshot of your mixer settings at the
timeline’s current mixer location.
•
Automix Undo/Redo
—to undo or redo your most recent Automix
action.
Click UNDO to reverse your last recording or editing action. If the
REDO light on the VS-2000 is lit, click REDO to restore your latest
undone action.
Click EXT SYNC so it lights to synchronize the VS-2000 to an external
device according to the current UTILITY menu Sync parameter settings.
Click the Metronome button to turn the VS-2000’s metronome on or
off by changing the setting of the METRONOME OUT parameter.
The parameter can be set to Off, INT (yellow) or MIDI (blue).
Click A.PUNCH to display the AUTO PUNCH/LOOP window in which
you can set punch in and -out points. If punch points have been set,
click this button turn on the VS-2000’s Auto Punch feature.
Punch-in and -out points appear above the Home screen’s playlist as red arrows. When
Auto Punch is turned on, a red bar connects the two points. See Page 50.
79
81
SNAPSHOTAUTOMIX
Automix Record Automix Undo/Redo
341
UNDO REDO
291
Off
MIDI
INT
308
190
VS2000v2Add.book 36 ページ ２００５年４月８日 金曜日 午後２時２４分
To Next Page
Loading...
