Roland VS-2480 - Selecting the Effect Bus Assignment

52
Using Effects
Selecting the effect bus assignment
When using the effect in a loop configuration, the AUX bus is used as the effect bus.
Here we will explain how to assign the effect bus.
fig.04-02_55
1. Press [EZ ROUTING
(PATCH BAY)]. Routing
View screen will appear.
2. Press [F4 (EFFECT)].
Loop Effect Assign screen
will appear.
fig.04-02-1
3. Select the AUX bus that you wish to use
as the effect bus. Here we will send the
FX 1 effect to AUX 1. Use [][]
to move the cursor to “FX1,” and use
the TIME/VALUE dial to set the
intersection of the bus to “AUX1.” Here
we will send the AUX1 signal to the
Effect 1 (FX 1).
4. Press [HOME (DISPLAY)]. Home Condition screen will appear.
SHUTTLE
ROUTING
EZ
32
0
/-
TAP
CLEAR
SNAPSHOT
ASSIGN
KNOB / FDR
NUMERICS
56
1
4
987
LOCATOR
JUMP
PREVIOUS NEXT
MENU
TRACK EDIT
SCENE
COPY MOVE INSERT CUT ERASE COMP / EXP.
IMPORT
LOOPA.PUNCH TOOUTIN FROM WAVE DISP
REDO
BANK AUX 7 AUX 8 USER
AUX 4 AUX 5 AUX 6 AUX 1
-
8
AUX 1 AUX 2 AUX 3
BANK
UNDO
SHIFT
PROJECT TRACK EFFECT UTILITY
MARKER
COPY MOVE TRIM IN TRIM OUT DELETE SPLIT NEW
AUTOMIX
REGION
PHRASE
CD
-
RW
MASTERING
AUTOMIX
ZOOM
GRADATION
MIDI DISK /
LOCATOR / MARKER / SCENE
TIME / VALUE
//
PATCH BAY
+
+
PA GE F1 F2 F3 F4 F5 F6 HOME
DISPLAY
1
2
3
3
4
You cannot change the
AUX send in the Loop
Effect Assign screen and
Channel View screen. At
this time, you can change
the AUX send in the Master
Edit screen.