Roland VS-2480 - Page 11

11
Objects shown in the VGA display
Lower area
fig.mixer-common2
1. EFFECT INSERT (when INPUT/TRACK MIXER)
fig.fxinsert-icon
The display will change according to the insert state. Of the two
graphs, the upper one shows the effect send level, and the lower
one shows the effect return level.
2. AUX SEND switching
AUX SEND Point switch
AUX SEND Level knob
3. DIR SEND switch
4. Effect connection diagram
From the upper left to right, this is displayed as FX1, FX2, ..., and the
bottom right is FX8. The audio will flow from FX1 toward FX8. The number
displayed for each effect is the effect patch number.
fig.mixer-common3
Right Side area
1. Level Meter
2. Level Measurement Point (PRE/POST) switching
3. SOLO switch
4. MUTE switch
5. MIX BUS SEND switch
6. PAN knob
7. Channel FADER
1
2
3
4
Ins Ins-L Ins-R Ins-S
no EffectOff used in Tr24
This is not displayed in the
channel view of the effect
return mixer.
The pre/post setting will
change in units of the AUX
b
us.
1
2
3
4
5
6
7