21
Objects shown in the VGA display
UTILITY Screen
■ ANALYZER Screen
fig.utility.eps
ANALYZER area
fig.common-trlevel_80
1. Analyze Source
2. AVERAGE TIMES
3. AVERAGE TYPE
4. Source Level Meter
5. Analyzer Display
6. PRE/POST Selector
7. USE EFFECT BOARD
Once you determine the effect board that will be used (by
means of “USE EFFECT BOARD”), that effect board will be
dedicated to the analyzer.
For example, if you select “A,” it will not be possible to use
FX1 or FX2 as effects.
If you want to use FX1 and FX2, you must access the Analyzer
page, and turn USE EFFECT BOARD “Off.”
When the following operations are performed, "Use EFFECT
Board" (settings for the effect board to be used for analyzer
processing) will automatically be turned "Off."
• Operations in Project condition
• Loading a scene or EZ Routing
• Changing an effect patch in automix or via MIDI
8. PEAK HOLD switch
9. MONITOR Level Meter
10. MASTER Level Meter
12 3 4 5 6
78910
To Next Page
Loading...
