Roland XP-10 - Page 52

Chapter 7. Using a sequencer to create an ensemble
Returning from General MIDI
System / GS Format back to
synthesizer operation
If the XP-10 has been set to function as a General
MIDI System / GS Format sound source as explained
above, or if the XP-10 has received a General MIDI
System On (p.50) or a GS Reset (p.50) from MIDI IN
and is functioning as a General MIDI System / GS
Format sound source, you can use one of the follow-
ing methods to restore it to conventional synthesizer
operation.
1. Re-select the currently selected Performance.
or,
2a. If in General MIDI System mode, transmit a
General MIDI System Off (p.81) to the XP-10.
2b. If in GS Format mode, transmit an Exit GS Mode
(p.81) to the XP-10.
52