118
List of Parameters That Can Be Affected Using the XV-2020
RHYTHM parameter
GM parameter
UTILITY parameter
Others
Parameter Page Procedure
LEVEL p. 63 Press [VALUE] to make the RHYTHM indicator lights up. ->
While holding down [VOLUME], press [VALUE]. ->
Turn [CATEGORY/BANK] to choose the parameter you want to set. ->
Turn [VALUE] to select the desired setting. ->
While holding down [VOLUME], press [VALUE].
OUTPUT ASSIGN p. 63
Parameter Page Procedure
PART LEVEL p. 98 Press [VALUE] to make the GM indicator lights up. ->
While holding down [VOLUME], press [VALUE]. ->
Turn [CATEGORY/BANK] to choose the parameter you
want to set. ->
Turn [VALUE] to select the desired setting. ->
While holding down [VOLUME], press [VALUE].
PART PAN p. 98
PART COARSE TUNE p. 98
PART FINE TUNE p. 98
PART TYPE (PATCH/RHYTHM) p. 98
PART NUMBER p. 98
REVERB SEND LEVEL p. 97
CHORUS SEND LEVEL p. 97
DRY SEND LEVEL p. 97
Heading Page Procedure
Patch/Rhythm Set/Performance
Write
p. 92 While holding down [VOLUME], press [VALUE]. ->
Rotating [CATEGORY/BANK] to select UTILITY. ->
Rotating [VALUE] to select “wrt”. ->
Press [VALUE] to select the write-destination Patch number,
rotating [VALUE] to select the write-destination number. ->
Press [VALUE] to recheck. ->
Press [VALUE] to execute
Transmitting Sound Settings p. 93 While holding down [VOLUME], press [VALUE]. ->
Rotating [CATEGORY/BANK] to select UTILITY. ->
Rotating [VALUE] to select “dtr”. ->
Press [VALUE] to recheck. ->
Press [VALUE] to execute
Initializing a Sound p. 92 While holding down [VOLUME], press [VALUE]. ->
Rotating [CATEGORY/BANK] to select UTILITY. ->
Rotating [VALUE] to select “ini”. ->
Press [VALUE] to recheck. ->
Press [VALUE] to execute
Restoring the Factory Settings p. 12 While holding down [VOLUME], press [VALUE]. ->
Rotating [CATEGORY/BANK] to select UTILITY. ->
Rotating [VALUE] to select “Fct”. ->
Press [VALUE] to recheck. ->
Press [VALUE] to execute
Checking the Program Version p. 95 While holding down [VOLUME], press [VALUE]. ->
Rotating [CATEGORY/BANK] to select UTILITY. ->
The version is indicated when [VALUE] is rotated
Heading Page Procedure
Selecting a Part in a Performance p. 71 Turn [PART]
PATCH (PART) Receive Channel p. 94 Turn [PATCH RX CH] ([PART])
Choosing a Patch p. 35 Turn [CATEGORY/BANK], Turn [VALUE]
Listening to Demo Songs refer to p. 1
To Next Page
Loading...
