95
Other Settings
Other Settings
Making USB-Related Settings
* With these parameters, changes in the settings are not reflected until the power is turned off and then on again.
Furthermore, only the XV-2020 can be used to make the settings.
* With these parameters, changes in the settings are not reflected until the power is turned off and then on again.
Furthermore, only the XV-2020 can be used to make the settings.
Procedure
1. While holding down [VOLUME], press [VALUE].
2. Turn [CATEGORY/BANK] to choose “MIDI-USB Thru” or “USB DESCRIPTOR.”
3. Turn [VALUE] to select the desired setting.
4. Press [VALUE] to set (write) the value.
5. While holding down [VOLUME], press [VALUE].
Initialize is executed.
Checking the Program Version
Procedure
1. While holding down [VOLUME], press [VALUE].
2. Turn [CATEGORY/BANK] to choose “UTILITY (PIANO).”
3. When you rotate [VALUE], the program version (number) is displayed.
4. While holding down [VOLUME], press [VALUE].
The XV-2020 exits Edit mode.
Parameter Value Description
MIDI-USB Thru OFF, ON OFF:MIDI messages arriving at the MIDI IN and the USB connectors are all sent to the
sound generator.
ON:MIDI messages arriving at the MIDI IN connector are output as is from the USB con-
nector, while the MIDI messages that arrive at the USB connector are output through the
MIDI OUT connector.
* When this parameter is set to “ON,” the sound generator receives MIDI messages only from the
USB connector. For the sound generator to receive MIDI messages from the MIDI IN connector,
the MIDI Thru function on your computer must be set to “ON.”
USB DESCRIPTOR VEN, GEN VEN (VENDOR): Select this when using the supplied driver with a USB connection.
GEN (GENERIC): Select this when using a generic USB driver included with the OS with
a USB connection.
Parameter Description
PROGRAM VERSION Shows the version of the XV-2020’s system program.
To Next Page
Loading...
