17
For Those Using a Computer
For Those Using a
Computer
Windows 2000 users
1. With the XV-2020 disconnected, start up Windows.
Disconnect all USB cables except for a USB keyboard and USB mouse (if used).
2. Log on to Windows as a user with administrative privileges (such as
Administrator).
3. Open the System Properties dialog box.
Click the Windows Start button, and from the menu that appears, select Settings |
Control Panel. In Control Panel, double-click the System icon.
fig.2-12_50
4. Open the Driver Signing Options dialog
box.
Click the Hardware tab, and then click
[Driver Signing].
If in step 4 the “What action do you want Windows to take?” setting was not set
to “Ignore”, a “Digital signature not found” dialog box will appear.
fig.2-5_35
If “What action do you want Windows to
take?” is set to “Warn,”
1. Click [Continue Anyway].
2. Continue the installation.
fig.2-5a_35
If “What action do you want Windows to
take?” is set to “Block”
1. Click [OK].
2. When the “Found New Hardware
Wizard” appears, click [Finish].
3. Perform the installation as described in
the “Troubleshooting” section on
Device Manager shows “?”, “!”, or “USB Composite Device” (p. 114).
Next, you need to make the driver settings. -> Settings and checking (p. 21)
To Next Page
Loading...
