rollease acmeda AUTOMATE ARC - Sleep Mode; Enter Sleep Mode; Exit Sleep Mode

13 | Automate™ Programming Instructions | ARC™ Venetian Tilt Motor ROLLEASE ACMEDA
8 SLEEP MODE
8.1 Enter sleep mode
8.2 Exit sleep mode
Sleep mode is utilized to prevent a motor from moving during shipping of a fabricated shade.
Hold P1 button on motor head.
Motor Response
Approx.
Motor Response
RELEASE P1
Motor Response
MOTOR RUNS TO LIMIT
Approx.
Exit sleep mode once shade is installed.
PRESS & RELEASE P1 button on motor head.
Motor Response