rollease acmeda AUTOMATE ARC User Manual

6 | Automate™ Programming Instructions | ARC™ Venetian Tilt Motor ROLLEASE ACMEDA
2 WIRING
2.1 Power Options
Ensure cable is kept clear of fabric.
Ensure antenna is kept straight and away from metal objects.
Automate DC motors are powered from a 12V DC power source. AA Battery wands, re-chargeable battery
packs and A/C power supplies are available, with a variety of quick connect extension cords. For centralized
installations, power supply range can be extended with 18/2 wire (not available through Rollease Acmeda).
• During operation, if voltage drops to less than 10V, the motor will beep 10 times to indicate a power
supply issue.
• Motor will stop running when the voltage is lower than 7V and it will resume again when the voltage is
greater than 7.5V.
DC Power Supply
Power Supply Motor
MTBWAND18-25 Battery Tube for 18/25mm DCRF (no Battery) Mtrs
(inc Mt clips)
MTDCRF18-0.2 - 18mm DCRF Motor, .2N/80
MTDCRF25-1.1 25mm DCRF Motor, 1.1N/40r
MTDCRF-TILT-1
MTDCRF-CL-0.6-50
MTDCPS-18-25 Power Supply for 18/25-CL/Tilt DCRF (no Bttry) Mtr
MTDCRF18-0.2 - 18mm DCRF Motor, .2N/80
MTDCRF25-1.1 25mm DCRF Motor, 1.1N/40r
MTDCRF-TILT-1
MTDCRF-CL-0.6-50
MTBPCKR-28 Rechargeable Wand
MTDCRF18-0.2
MTDCRF25-1.1
MTDCRFQ28-2
MTDCRF-TILT-1
MTDCRF-CL-0.6-50
Extension Cables Length
MTDC-CBLXT6 DC Battery Motor Cable extender 6” / 155mm 6 inch
MTDC-CBLXT48 DC Battery Motor Cable extender 48” / 1220mm 48 inches
MTDC-CBLXT96 DC Battery Motor Cable extender 96” / 2440mm 96 inches

rollease acmeda AUTOMATE ARC Specifications

General

Brand	rollease acmeda
Model	AUTOMATE ARC
Category	Engine
Language	English