What to do if the SAFETY switch is tripped when opening the RollSeal SC-325?
If the SAFETY switch is tripped when opening, check the wiring and connections. Also, ensure that the SAFETY switch arm is completely depressed.
What to do if the SAFETY switch is tripped on my RollSeal SC-325 Controller?
If the SAFETY switch is tripped, check the wiring and ensure that the SAFETY switch arm is completely depressed.
What to do if the HOME switch is tripped on my RollSeal Controller?
If the HOME switch is tripped, check the wiring and make sure the HOME switch arm is completely depressed.
What to do if both SAFETY and HOME switches are tripped on RollSeal SC-325?
If both the SAFETY and HOME switches are tripped, check the wiring and ensure that the HOME & SAFETY switch arm is completely depressed.
What to do if the HOME switch is tripped when opening the RollSeal Controller?
If the HOME switch is tripped when opening, check the wiring and ensure that the HOME switch arm is completely depressed.
What to do if I see an Inverter Fault on my RollSeal SC-325?
If there is an Inverter Fault, check the backboard and motor.
What to do if there is an Inverter Fault when opening the RollSeal SC-325?
If there is an Inverter Fault when opening, check the backboard and motor.
What to do if there is an Encoder Fault when opening the RollSeal SC-325 Controller?
If there is an Encoder Fault when opening, check the DC harness and make sure the optics are clean.
What to do if the HOME & SAFETY switches are tripped when opening the RollSeal Controller?
If the HOME & SAFETY switches are tripped when opening, manually release the brake and pull the panel below the Home switch.
How to fix a Memory Malfunction on RollSeal SC-325?
To fix a Memory Malfunction, reset the controller.
General| Brand | RollSeal |
|---|---|
| Model | SC-325 |
| Category | Controller |
| Language | English |
Consolidates critical safety warnings regarding electrical hazards, rotating machinery, wiring, and proper installation for user safety.
Explains various display readings like software version, actual position, and status indicators.
Covers service reminders, safety beam, leading edge switch, home switch, and safety switch functions.
Explains how to enter program mode and details parameters like Close Time Delay, Acceleration, Deceleration, and Door Interlocks.
Details how to adjust acceleration and deceleration ranges using parameters P2 and P3 for smooth door operation.
Provides step-by-step instructions for setting the door's open and closed limits.
Explains how to use input status indicators on the display for troubleshooting.
Lists common error codes, their descriptions, and recommended troubleshooting actions.
Provides overall wiring diagrams for the automatic door and the smart controller.
To Next Page
