To Next Page
B
Brandon LambertSep 12, 2025
How to resolve a Controller Malfunction on RollSeal?
- MmahoneytinaSep 12, 2025
To resolve a Controller Malfunction, reset the controller.
How to resolve a Controller Malfunction on RollSeal?
To resolve a Controller Malfunction, reset the controller.
What to do if there is an Encoder Fault when closing the RollSeal Controller?
If there is an Encoder Fault when closing, check the DC harness and make sure the optics are clean.
How to fix Closing, Direction Fault on RollSeal Controller?
If there is a Direction Fault when closing, reverse two phases to the motor.
General| Brand | RollSeal |
|---|---|
| Model | SC-325 |
| Category | Controller |
| Language | English |
Consolidates critical safety warnings regarding electrical hazards, rotating machinery, wiring, and proper installation for user safety.
Explains various display readings like software version, actual position, and status indicators.
Covers service reminders, safety beam, leading edge switch, home switch, and safety switch functions.
Explains how to enter program mode and details parameters like Close Time Delay, Acceleration, Deceleration, and Door Interlocks.
Details how to adjust acceleration and deceleration ranges using parameters P2 and P3 for smooth door operation.
Provides step-by-step instructions for setting the door's open and closed limits.
Explains how to use input status indicators on the display for troubleshooting.
Lists common error codes, their descriptions, and recommended troubleshooting actions.
Provides overall wiring diagrams for the automatic door and the smart controller.