© 2017 Ropam Elektronik
Tab: System options.
The tab allows you to set options related to:
- transmission test (type, transmission interval, content, to whom, content),
- notification counters (daily)
- time of notification,
- response to incoming calls,
- SMS control options
- other options (DTMF control).
SMS control:
- SMS active control: enabled if: The system is supported by RopamDroid and single SMS commands,
- send confirmation of SMS command execution: turn on if the system is supported by the application
RopamDroid (needed for the visualization of system operations / module BasicGSM 2). Optionally
disable if you do not use the module control from the RopamDroid application and / or SMS,
- control only possible for numbers from the list: option selected - control by SMS commands /
applications RopamDroid will only be possible for the phone numbers listed in the numbers list in the
tab: Phone numbers, email addresses,
- send unrecognized SMS to the first number (Echo): the option selected - the module sends
unrecognized messages (eg ads, offers, other non-command messages to the module) to the first
phone number listed in the tab: Phone numbers, email addresses,
To Next Page
Loading...