EN
42
Parts
Verify the tight fit of the stem: Stand in front of the bike with the front wheel between your knees
and try to turn the handlebar left and right.
→ It should not be possible to turn the handlebar with normal force.
X X
Check the headset for play: Stand next to your bike with both hands on the handlebar. Pull the
front brake lever and gently push the bike backwards and forwards.
→ There should be no play in the headset.
X X
Make sure that all components are tight.
→ Tighten the components to the proper torque, if necessary (see "7.4 Torques" on page 48).
X X
Frame
Check the frame for damage and deformation.
→ There must be no damages.
X X
Check whether all cables and hoses are in the cable clips and verify the tight fit of the clips.
→ All cables must fit firmly in the cable clips.
X X
To Next Page
Loading...
