EasyManua.ls Logo

Ross Ultricore RCP-ME - Page 40

Ross Ultricore RCP-ME
98 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
40 • Breakaways and Levels RCP-ME User Guide (v4.0)
6. Send the current configuration file to the device (see “To send the current configuration to a panel” on
page 74).
Using a Level Mask Button
A Level Mask button enables you to quickly view what levels are selected, and edit which levels are included in the
next crosspoint switch.
The three buttons between FOLLOW and LEVEL 1 are to retain consistency with Category mode.
Figure 4.1 Example of the Level Mask Mode Button Mapping
Table 4.2 summarizes the buttons for Level Mask mode.
To use level mask mode
1. To enter Level Mask edit mode, press and hold LEVEL MASK for approximately 1 second.
2. Toggle the required levels.
In the following example,
LEVEL 1 and LEVEL 2 are selected.
Some levels may be lit from a previous level mask setting.
3. Press
EXIT to exit from edit mode.
The user will be returned to the menu that was active prior to the Level Mask edit function.
The
LEVEL MASK button will remain lit indicating the next source selection will be executed only on the
levels of the routing system as selected whilst in Level Mask edit mode.
A short press of the LEVEL MASK button will disable the Level Mask mode and the RCP-ME will return to the
previous breakaway (e.g. TIED).
Table 4.2 Level Mask Mode — List of Available Buttons
Button Description
LEVEL MASK Short press to toggle on/off the Level Mask prior to a source selection
Long press to enter Level Mask options
EXIT Exits Level Mask mode
FOLLOW Quickly selects all available levels
Individual Levels Toggle on/off levels to be included in the subsequent source selection.
The button will be lit to indicate a level is included in the level mask,
unlit to indicate exclusion from the level mask.
The display will briefly report
ADD:<level name> or REM:<level
name>
as individual level buttons are toggled on/off.
The availability of levels is determined by the Level Names enabled
box on the RCP-ME DashBoard interface.
RCP-ME
1234
EXIT
FOL-
LOW
LEVEL
1
LEVEL
4
LEVEL
16
LEVEL
32
LEVEL
17
LEVEL
18
LEVEL
19
LEVEL
20
LEVEL
21
LEVEL
23
LEVEL
24
LEVEL
25
LEVEL
26
LEVEL
27
LEVEL
28
LEVEL
30
LEVEL
31
LEVEL
29
LEVEL
22
LEVEL
5
LEVEL
6
LEVEL
8
LEVEL
7
LEVEL
9
LEVEL
10
LEVEL
11
LEVEL
12
LEVEL
13
LEVEL
14
LEVEL
15
LEVEL
2
LEVEL
3

Table of Contents

Related product manuals