Rosslare AYC-E65BW User Manual

Controller Operation
AYC-Ex5/T65 Series Installation and Programming Manual 53
4. Perform one of the following:
Enter the 4- to 8-digit PIN code belonging to
the user for whom you wish to add a
Secondary code.
Present the user card belonging to the user for whom you wish
to add a Secondary code.
The left LED flashes red.
If the Primary code entered is not valid, you hear a long beep
and the unit continues to wait for a valid Primary code.
5. Perform one of the following:
Enter the 4- to 8-digit code
to be used as the
Secondary code.
Present the user card to be used as the Secondary code.
If the Secondary code is valid, the controller beeps three times
and returns to Normal mode.
If the Secondary code is invalid, the controller sounds a long
beep, and the unit continues to wait for a valid Secondary code
to be entered.
Red
Orange

Rosslare AYC-E65BW Specifications

General

Brand	Rosslare
Model	AYC-E65BW
Category	Controller
Language	English