Rotary 000 Series User Manual

21
4.4 While Using Lift:
• Avoid excessive rocking of vehicle while on lift.
• Always use safety stands as needed for stability
when removing or installing heavy components.
(i.e..: engines, transmissions, etc.) Use 4 safety
stands.
• Raise safety stands to meet vehicle, do not lower
vehicle onto stands.
• Avoid accidental touching of exposed exhaust
system on raised vehicles. Watch for air hoses and
electrical cords which may be tripped over.
• Wear safety glasses while working under vehicle.
4.5 Before Lowering Lift:
• Remove all tools or other objects from lift area.
• Assure personnel are not in lift area.
4.6 To Lower Lift:
• Remain clear of lift when lowering vehicle. Keep
Feet Clear!
• Actuate the LOWER BUTTON to lower lift until lift
stops.
• Actuate LOWER TO GROUND button to lower
remaining distance to ground.
4.7 Unloading:
• Assure lift is fully lowered.
• Remove any rubber blocks used when raising the
vehicle.
• Carefully remove vehicle from lift area.
4.8 Power Off:
• Turn Main switch to "OFF" position while lift is not
in use.if need ,lock the switch with a padlock.
5. Problems, causes, actions
The following lists contain information on pote-
ntial problems,their causes, and actions to rect-
ify the fault.
Repairs to safety equipment of the lift
may only be operated by authorized
maintenance technician (certied expert
or competent person) be performed.
During a breakdown (power failure), the lift
remains automatically in safe mode. This
means that all movement is halted.
If the lift is out of order for long periods,
carry out the following steps:
1. Lower the lift to the lowest position.
2. Switch the main switch to
Off and lock with a padlock.
3. Disconnect the power supply.
5.1 Troubleshooting by the operator
The following troubleshooting measures may
only be carried out by an authorized operator.
Before doing so, make sure that power supply
is connected, the main switch is in the "ON“position.
If thethe problem is not rectied by the
listed measures,you must seek advice
from a competent person.
The troubleshooting measures listed in 5.2
may only be carried out by maintenance
contractors.
i
i
i
i

Rotary 000 Series Specifications

General

Brand	Rotary
Model	000 Series
Category	Scissor Lifts
Language	English