2
SAFETY INSTRUCTIONS
Never allow unauthorized or untrained persons to
operate lift or rolling jacks.
Shop Policy should prohibit customers or non-author-
ized persons from being in shop area while lift is in
use.
Thoroughly train all employees in the use and care of
lift and rolling jacks.
Be Sure no one is standing in front or behind lift while
vehicle is being driven onto or backed off the lift.
DO NOT allow rear tires or portion of vehicle to interfere
with ramp/chocks.
Be Sure front wheel stops are in raised position before
driving vehicle onto lift.
Never allow front wheels to strike the front wheel stops.
DO NOT permit employees or customers on lift when it
is either being raised or lowered.
Always stand clear of lift when raising or lowering and
observe "Pinch Points" Warning.
OWNER/EMPLOYER RESPONSIBILITIES
The Owner/Employer:
Shall establish procedures to periodically maintain,
inspect and care for the lift in accordance with the
manufacturer's recommended procedures to ensure its
continued safe operation.
Shall provide necessary lockout/tagouts of energy
sources per ANSI Z244.1 - 1982 before beginning any
lift repairs.
Shall not modify the lift in any manner without the
prior written consent of the manufacturer.
Shall display the operating instructions and "Lifting It
Right", supplied with the lift, in a conspicuous location
in the lift area convenient to the operator.
Shall ensure that lift operators are instructed in the
proper and safe use and operation of the lift using the
manufacturer's instructions and "Lifting It Right" and
"Safety Tips" supplied with the lift.
Rotary Lift requires that a filter/regulator/lubricator
be installed between the air source and the lift (P.N.
FA2259).
Never overload lift: capacity of lift is 12,000 lbs. (6,000 lbs.
per axle). Capacity should not be exceeded.
Always engage parking brake and use the rear wheel
chocks to keep the vehicle from rolling freely on the
runways.
Always lower lift on locks before working on vehicle.
Keep area around lift clean of tools, debris, grease,
and oil.
Always keep runway clean.
Replace all caution, warning, or safety related decals
on the lift when unable to read or missing.
For Rolling Jack Safety Instructions see Rolling Jack
Installation, Operation and Maintenance Instructions
in the rolling jack box.
To Next Page
Loading...
Need help?
General
