Rotary SPO12 Standard - Phase Lifts

4
Fig. 2
Overhead Assembly
13'-11 1/2"
To p
Overhead
Assembly
(14'-11 1/2" EH1)
Tie Bar & Spacers -use
(2)3/8"-16NCx 2-1/2"
Carriage Bolts
And Flanged Lock Nuts
Use (2) 3/8"-16NCx1"
Carriage Bolts
In Front And
(2) In the Back
3/8"-16NCx3/4" HHCS
& Flanged Locknut
Mounting
Bracket
Fig. 6
SPO12 Hummer Supplement Instructions
WARNING
DO NOT install this lift in a pit or
depression due to fire or explosion risks.
IMPORTANT
If you have ordered a SPO12 Hummer Lift (5W0/7W0 Series) these figures MUST
be used in place of the standard instruction figures on pages 7 & 8.
131"
11-3/4"
(2)3/8"-16NC x 3/4" HHCS & Flanged Locknut
(4)3/8"-16NC x 1" Flanged HHCS and Flanged Nuts
1 Phase Lifts
1/4"-20NC x 2-3/4" HHCS
& 1/4" Locknut
1/4"-20NC x 2-3/4" HHCS,
Flat Washer, Spacer, and Nut
Spacer
Star
Washer
This Side
2 Spacers