Rotax 912 i series

To Previous Page

d07068.fm

SI-912 i-029 / SI-915 i-012

SI-916 i-007

SERVICE INSTRUCTION

08 February 2024 74-20-00

Initial Issue Page 15 of 15

3.5.5) Wiring harness - installation

3.6) Finishing work

- Restore aircraft to original operating configuration.

- Connect negative terminal of aircraft battery.

3.7) Test run

Conduct test run.

3.8) Summary

- The objective of the Customer Service Information Report (CSIR) is to give an efficient way for

Rotax Aircraft Engine Operators, Maintenance Technicians and Governmental Authorities a

method to report any condition which may adversely affect safe operation of the engine.

- Filling out an online ROTAX CSIR is the most efficient method of reporting an occurrence to

BRP-Rotax.

NOTE: Work on EASA certified parts might affect the EASA Form 1 and does require appropri-

ate documentation by authorized persons. Repairs must be entered into the engine

logbook and also do apply for the EASA Form 1.

A revision bar outside of the page margin indicates a change to text or

graphic.

Translation into other languages might be performed in the course of language localization but

does not lie within ROTAX

scope of responsibility.

In any case the original text in English language and the metric units are authoritative.

3.9) Inquiries

Inquiries regarding this Service Instruction should be sent to the ROTAX

Authorized Distributor of

your area.

A list of all ROTAX

Authorized Distributors or their independent Service Centers is provided on

https://dealerlocator.flyrotax.com.

NOTE: The illustrations in this document show the typical construction. They may not rep-

resent full detail or the exact shape of the parts which have the same or similar

function.

Exploded views are not technical drawings and are for reference only. For specific

detail, refer to the current documents of the respective engine type.

See current Maintenance Manual Heavy (MMH) for the respective engine type, Chapter

76-50-00 Wiring harness - installation.

See Chapter 12-20-00 of the latest Maintenance Manual Line (MML) for the respective

engine type.

Rotax 912 i series - Page 15