EasyManua.ls Logo

Rotax 912 i series - Page 2

Rotax 912 i series
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
d07068.fm
08 February 2024 74-20-00
Initial Issue Page 2 of 15
Copyright - BRP-Rotax GmbH & Co KG. All rights reserved.
SI-912 i-029 / SI-915 i-012
SI-916 i-007
SERVICE INSTRUCTION
1.7) Labor time
Estimated labor hours:
Engine installed in the aircraft - - - labor time will depend on airframe installation and therefore no
estimate is available from the engine manufacturer.
1.8) Mass data
Change of weight - - - none.
Moment of inertia - - - unaffected.
1.9) Electrical load data
No change.
1.10) Software modifications
No change.
1.11) References
In addition to this technical information refer to current issue of
- in general Illustrated Parts Catalog (IPC) and in particular:
Chapter 74-20-00 and 76-50-00.
- in general Operators Manual (OM)
- in general Installation Manual (IM)
- in general Maintenance Manual Line (MML) and in particular:
Chapter 74-20-00 and 76-50-00
- in general Maintenance Manual Heavy (MMH) and in particular:
Chapter 74-20-00 and 76-50-00
NOTE: The status of the Manuals can be determined by checking the table of amendments.
The 1
st
column of this table shows the revision status. Compare this number to the one
listed on the ROTAX website:
www.flyrotax.com. Updates and current revisions can be downloaded for free.
1.12) Other Publications affected
None.
1.13) Interchangeability of parts
- Not affected

Other manuals for Rotax 912 i series

Related product manuals