d06703.fm
SI-912 i-024
SI-915 i-006
SERVICE INSTRUCTION
03 July 2019 76-10-00
Initial Issue Page 17 of 18
Copyright - BRP-Rotax GmbH & Co KG. All rights reserved.
Fig. 20
- Restore aircraft to original operating configuration
- Connect negative terminal of aircraft battery
3.4) Test run
3.5) Summary
These instructions (section 3) have to be followed in accordance with the deadlines specified in
section 1.5.
The execution of the Service Instruction must be confirmed in the logbook.
A revision bar outside of the page margin indicates a change to text or
graphic.
Translation into other languages might be performed in the course of language localization but
does not lie within ROTAX
®
scope of responsibility.
In any case the original text in English language and the metric units are authoritative.
3.6) Inquiries
Inquiries regarding this Service Instruction should be sent to the ROTAX
®
Authorized Distributor
of your area.
A list of all ROTAX
®
Authorized Distributors or their independent Service Centers is provided on
www.flyrotax.com
.
4 Connector bracket
5 Connector nut
Conduct test run. See Chapter 12-20-00 of the latest Maintenance Manual Line for the
respective engine type.
To Next Page
Loading...
