[ 43 ]
Fig. 5.3.1: Standard connection diagram ROTEX GasSolarUnit
1)
5.3 Hydraulic system connection
The descriptions in the following hydraulic
diagrams are explained in Tab. 5.3.1 on
page 48.
1) The connection diagram shown makes no claim as to its completeness and is no replacement for careful system engineering.
Please note: Risk of scalding
During the operation of the Gas-
SolarUnit, particularly when
utilising solar energy, cylinder temperatures in
excess of 60 °C can occur. Therefore, install an
anti-scalding device on site (DHW mixing
facility). The same applies to the Gas-
CompactUnit, if cylinder temperatures above
60 °C can occur.
To Next Page
Loading...
