Rotex HPSU 6-8X User Manual

6 x Operation
82
FA ROTEX HeatPumpSolarUnit - Part 2 - 05/2009
6.3.2 Copying switching times for room cooling / room heating
With the cooling/heating program
1)
you can copy all programmed switching times for a certain day to the next day (e.g. all
programmed switching times from "Monday" to "Tuesday").
1)
The function room cooling is available only for systems of type "HPSU..X".
Reading switching times
1. Use the key to select the operating mode to be programmed.
2. Use the key to confirm the selection.
 The selected operating mode flashes.
3. Use the key to confirm the selection.
 The current day flashes.
4. Use the
and keys to select the weekday to be
programmed.
 The selected weekday flashes.
To select another weekday, press the key.
Copying switching times
5. Press the key and the key at the same time for 5 s.
 After 5 s the next weekday is shown.
 This means that the switching times of the previous day have
now been copied.
6. By pressing the key, you return to step 1.
Fig.6-5 Read and copy switching times

Rotex HPSU 6-8X Specifications

General

Brand	Rotex
Model	HPSU 6-8X
Category	Inverter
Language	English