Rotex HPSU 6-8X User Manual

6 x Operation
85
FA ROTEX HeatPumpSolarUnit - Part 2 - 05/2009
Deleting all switching times for a whole week day (Only for room heating / room cooling
1)
)
Deleting all switching times for a certain weekday is only possible for the selected operating mode room heating or room cooling
1)
.
If the switching times of the other operating modes are also to be deleted for this weekday, at the start of the deletion process,
select the corresponding switching time.
The following table explains the procedure.
For example:
– First, the operating mode is selected.
– The weekday Monday is selected.
– Press the key and the key for 5 s to delete the switching times.
1)
The function room cooling is available only for systems of type "HPSU..X".
1. Use the key to select the operating mode to be
programmed.
2. Use the key to confirm the selection.
 The selected operating mode flashes.
3. Use the key to confirm the selection again.
 The current day flashes.
4. Use the
and keys to select the
weekday to be deleted.
 The selected weekday flashes.
5. Press the key and the key at the same time for
5s.
 All switching times saved for this weekday are
deleted.
6. It automatically returns to step 4.
Fig.6-8 Delete switching times of one weekday

Rotex HPSU 6-8X Specifications

General

Brand	Rotex
Model	HPSU 6-8X
Category	Inverter
Language	English