Rotex Posidapt Series User Manual

RTX-IOM-PRODUCT-YY
Page 103 of 131
www.rotexautomation.com
8.3.5. Diagnostics
Counter Threshold
Monitoring Number of Strokes
Applicable for Posidapt –Super and Ultra
This parameter is used to monitor the entire path covered by the final controlling element
continuously.
The current value is displayed in the “Number of strokes” diagnostics parameter. The device
triggers a fault message if the current value exceeds one of the three configurable limit
thresholds.
Threshold Limit 1
Use this sub-parameter to set the limit threshold 1.
• Off
This parameter value does not trigger any message or alarm.
• Custom
The threshold 1 fault message is displayed when the limit threshold 1 is exceeded. The
value can be set up to 100000000.
Threshold Limit 2
Use this sub-parameter to set the limit threshold 2.
• Off
This parameter value does not trigger any message or alarm.
• Custom
The threshold 2 fault message is displayed when the limit threshold 2 is exceeded. The value
can be set up to 100000000.
Threshold Limit 3
Use this sub-parameter to set the limit threshold 3.
• Off
This parameter value does not trigger any message or alarm.
• Custom

Rotex Posidapt Series Specifications

General

Brand	Rotex
Model	Posidapt Series
Category	Valve Positioners
Language	English