www.rotexautomation.com
Safety
Warning notice
This manual contains notices you have to observe in order to ensure your personal safety, as
well as to prevent damage to property. The notices referring to your personal safety are
highlighted in the manual by a safety alert symbol notices referring only to property damage
have no safety alert symbol. These notices shown below are graded according to the degree
of danger.
WARNING:
• If not observed, user incurs a high risk of severe damage to product and/or fatal
injury to personnel.
CAUTION:
• If not observed, user may incur damage to product and/or injury to personnel.
NOTE:
• Advisory and information comments provided to assist maintenance personnel to carry out
maintenance procedures.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel
qualified for the specific task in accordance with the relevant documentation, in particular its
warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable of
identifying risks and avoiding potential hazards when working with these products/systems.
Disclaimer of Liability
This manual provides information on installation, operation and maintenance procedures and
related instructions for the ROTEX make POSITIONER (Smart positioner).
The aim of this literature is to support the use of products in correct manner, and all the
technical information provided in the catalogue.
The manual should be given to the end user.
The manual can be changed or revised without any prior notice. Any changes in product's
specification, structure, and/or any components may not result immediate revised version of
the manual.
The manual should not be duplicated or reproduced for any purpose without any consent of
Rotex Manufacturers & Engineers Private Limited, INDIA.
To Next Page
Loading...
Need help?
General