Roth Softline - App Configuration; Software Update Procedure; Technical Data

User Manual - 12/12
VI. App conguration
If you want to be able to control your Roth Soline heating system using the Roth Soline app, you need to create an account on the
Roth Soline app.
The app can be downloaded” in the App Store or in Google Play.
For more details please see the specic manual delivered with the Soline WiFi Internet module, which is also availble on our website.
VI. SOFTWARE UPDATE
To install new soware, disconnect the WiFi Internet module from the power supply. Insert a ash drive with new soware into the USB port.
Next, connect the WiFi Internet module to the power supply holding EXIT at the same time until a single sound signal is heard. It indicates that
the soware installing process has started. Aer successful update, the WiFi Internet module will reset automatically.
NOTE
Soware update may be conducted only by a qualied tter. Aer the soware has been updated, it is not possible to return
to the previous settings. All pairings and settings will be deleted.
NOTE
Do not switch o the controller during soware update.
VII. TECHNICAL DATA
Roth Soline WIFI Internet module HVAC no. 7466397000
Supply voltage 5V DC/230V AC adapter
Power consumption 2W
Communication output RS/RJ12
Transmission IEEE 802.11 b/g/n (2,4 GHz)
Range up to 30 m (ordinary building)
Ambient temperature 5 - 50°C
Ambient humidity Max. 80% RF
Storage/transport temperature -20 - +50°C
Degree of protection IP20 (EN60529)
Approvals CE 2014/53/EU
!
!
Roth Soline
User Manual_Roth Soline WiFi module_20220127