Roth Softline - User Manual

Other manuals for Roth Softline

Installation Manual8 pages

Installation12 pages

Need help?

Do you have a question about the Roth Softline and is the answer not in the manual?

Summary

Safety Information

Warning: Electrical Shock Hazard

Risk of fatal electric shock from touching live connections. Ensure power is off before working.

Note: Cable Connection Risks

Incorrect connection of cables may lead to controller damage.

First Start-up Guide

Step 1: Connect WiFi Module

Connect the WiFi Internet module using the included RS cable and power supply.

Step 2: Set Device Language

Switch on power, select and confirm the desired language for the device interface.

Step 3: Configure Time and Date

Set time and date automatically via internet or manually through clock and date settings.

Step 4: Configure Internet Connection

Step 5: Connect to Mobile App

Connect the Master Controller to the Roth Softline app for remote control and monitoring.

Screen Description

Display Elements

Description of screen elements: day of week, date, time, network name, active status, and signal strength.

WiFi Module Functions

Network Configuration

Configure connection parameters like DHCP, IP address, Gateway, DNS, and MAC address.

Registration Menu

Navigate the menu to initiate the module registration process with the controller.

Reset Module Password

Option to delete the current module password or retain the existing password.

Time Settings

Set time and date automatically via internet connection or manually via clock and date settings.

Screen Settings

Adjust display contrast, brightness, screen fade, and extinguishing time.

Language Version

Select and set the preferred language for the device interface from available options.

Service Menu

Access advanced settings for system functionality and performance, secured by a password.

Factory Settings

Restore user settings to the default manufacturer settings for the WiFi module.

Software Version

View the current controller software version installed on the WiFi module.

The Roth Softline WiFi Internet module is an advanced wireless internet connection device designed to integrate with the Roth Softline Controller - Master, enabling remote control and monitoring of a heating system via a dedicated mobile application. This module facilitates communication between the Softline Controller and a local WiFi router, allowing users to manage their heating system from anywhere.

Function Description:

The primary function of the Roth Softline WiFi Internet module is to provide an internet connection for the Softline Controller - Master. This connection enables the controller to communicate with the Roth Softline app, allowing users to:

Remote Control: Adjust heating settings, schedules, and modes from a smartphone or tablet.
Monitoring: View the current status, temperature readings, and operational data of the heating system.
System Integration: Facilitate the connection between the Softline Controller - Master, the WiFi Internet module itself, and other WiFi Internet modules within the system.

The module supports both automatic and manual time and date settings. When connected to the internet and "Automatic" is checked, the clock and date are synchronized automatically. Manual settings allow users to precisely configure the time and date.

Important Technical Specifications:

HVAC no.: 7466397000
Supply voltage: 5V DC/230V AC adapter
Power consumption: 2W
Communication output: RS/RJ12
Transmission: IEEE 802.11 b/g/n (2.4 GHz)
Range: Up to 30 m (in an ordinary building)
Ambient temperature: 5-50°C
Ambient humidity: Max. 80% RF
Storage/transport temperature: -20 - +50°C
Degree of protection: IP20 (EN60529)
Approvals: CE 2014/53/EU

Usage Features:

The module features a clear display and intuitive control buttons for easy navigation and configuration.

First Start-up and Installation:

Physical Connection: The module must be installed by a qualified person and securely mounted on a wall or in a cabinet. Before connecting, the power supply to the controller must be switched off to prevent electric shock. The module cover is removed (by unscrewing the bottom front screw) to access the connectors. The module is then connected to the Softline Controller - Master using the included RS cable and power supply, following the provided diagrams and connector labels.
Power On and Language Selection: After connecting, switch on the power supply. Press the MENU button, use the up/down buttons to select "Language version," and confirm with MENU.
Time and Date Settings: Press MENU, select "Time settings," and press MENU again. If "Automatic" is checked and the module is connected to the internet, time and date will set automatically. Otherwise, select "Clock settings" or "Date settings" to manually configure hour, minute, year, month, and day using the up/down buttons and confirming with MENU.
Internet Connection Configuration:
- WiFi Selection: Press MENU, select "Network Wi-Fi selection," and press MENU. The module will scan for available routers. Select the desired router using the up/down buttons and confirm with MENU.
- Password Entry: Enter the router's password using the left/right buttons to select characters (holding them down for faster scrolling) and MENU to jump to the next character. Confirm with MENU when done.
- Connection Confirmation: A "Connection has been successfully established" message will appear upon successful connection.
Master Controller to App Connection: Refer to the specific instructions provided with the Master Controller or on the Roth website for details on connecting the Master Controller to the Roth Softline app. The app is available on the App Store and Google Play.

Screen Description:

The module's display shows key information:

Day of the week
Current date
Current time
Network name (SSID)
Module status (active/online)
Signal strength of the WiFi connection

Menu Navigation and Controls:

Display: Shows all information and menu options.
EXIT button: Used to exit menus and cancel settings.
"Up" / "Plus" button: Used to view menu options, increase parameter values, and switch between parameters during standard operation.
"Down" / "Minus" button: Used to view menu options, decrease parameter values, and switch between parameters during standard operation.
MENU button: Used to enter the WiFi Internet module menu and confirm new settings.

WiFi Module Functions (Main Menu):

Network WiFi selection: For connecting to a local WiFi router.
Network configuration: Allows manual configuration of network access parameters (Disconnect, DHCP, IP address, Subnet Mask, Gateway address, DNS address, MAC address). This should be done by a skilled person.
Registration: Configures the connection between the Softline Controller - Master, the Softline WiFi Internet module, and other WiFi Internet modules. This involves a pairing process initiated on both the module and the Softline Controller - Master (via "Fitters menu" > "Internet module" > "Registration"). A pairing code will be displayed for app connection.
Reset module password: Allows deletion of the module's password.
Time settings: Configures time and date (automatic or manual).
Screen settings: Adjusts display parameters (Screen view, Display contrast, Screen brightness, Screen fade, Extinguishing time).
Language version: Selects the display language (English, Swedish, Norwegian, Finnish, Danish).
Service menu: For advanced settings, accessible with password "1234." Only for qualified personnel. Includes Display contrast and Factory settings.
Factory settings: Restores user settings to manufacturer defaults.
Software version: Displays the current software version.

Maintenance Features:

Software Update: New software can be installed using a flash drive.
1. Disconnect the module from power.
2. Insert the flash drive with new software into the USB port.
3. Reconnect power while holding the EXIT button until a single sound signal is heard, indicating the update has started.
4. The module will reset automatically after a successful update.
- Important Notes: Software updates should only be conducted by a qualified fitter. All pairings and settings will be deleted after an update, and it's not possible to revert to previous settings. Do not switch off the controller during a software update.
Reset Module Password: The password for the Softline WiFi Internet module can be deleted, requiring a new password to be set for continued operation.
Factory Settings Reset: The module allows users to restore all settings to the manufacturer's defaults, which can be useful for troubleshooting or reconfiguring the device.