Calibration Procedure for ROTRONIC
Digital Products
and Service Cable Overview
Contents:
1. Procedures:..............................................................................................................2
1.1 General recommendations................................................................................2
1.2 Sources of errors...............................................................................................2
1.3 Periodic probe calibration..................................................................................2
1.4 Reference adjustment by HygroPalm 3 handheld instrument ...........................3
1.5 Probe adjustment with calibration device and Humidity Standard.....................3
2. Cable Overview........................................................................................................5
2.1 HygroPalm connected to PC.............................................................................5
2.2 HygroPalm connected to HygroFlex..................................................................5
2.3 HygroPalm connected to M- & Roline L Series .................................................6
2.4 M23 / M33 connected directly to PC..................................................................6
2.5 M1-Series & Roline L connected to PC via HygroPalm.....................................7
2.6 M1- & Roline L Series connected to PC via MOK-WIN and ACRLXB5.............7
2.7 M1S- & Roline LxS Series connected to PC via MOK-WIN and ACRLXB5 ......8
2.8 Frequently asked questions ..............................................................................9
3. Theory on calibration..............................................................................................10
3.1 Multipoint adjustment ...........................................................................................10
3.2 Single point Adjustment...................................................................................13
To Next Page
Need help?
General
