USER MANUAL
23
PHOTO SETTINGS
To Enter Photo Setting:
•> Press & Hold “MENU” button to enter Photo Mode.
•> Press “MENU” button ONCE to enter Photo Settings.
•> Press “DOWN” button to access photo settings.
•>
Now use "UP" or "DOWN" buttons to scroll through > then press "OK" button to
enter particular setting > then select the setting you prefer to set > then press
"OK" button again to confirm that setting and go back to photo settings menu.
Here you can choose take single shot snapshot or set self timer according to your
preference.
1. Capture Mode
Here you can choose your desired photo resolution. Higher the resolution Better the
pixel resolution for captured image.
• 12M 4032 x 3024 (Default)
• 10M 3648 x 2736
• 8M 3264 x 2448
• 5M 2592 x 1944
• 3M 2048 x 1536
• 2M HD 1920 x 1080
• 1.3M 1280 x 960
• VGA 640 x 480
This feature will allow you to review each image immediately after capture for desired
setting before taking next image.
• OFF (Default)
• 2-Seconds
• 5-Seconds
2. Resolution
3. Sequence
To Next Page
Loading...
