USER MANUAL
33
Camera gets HOT
It is normal for your camera to run slightly hot. Please see temperature
guidelines.
TROUBLE SHOOTING YOUR ROVE R1 DASH CAM
Camera does not turn ON
Error/Message “Card Full”
Camera Freezing/Lagging or Crashing.
Video is fuzzy
1. Use Included USB Cable & your smart phone’s charger. Now plug it into
your home’s wall outlet.
2. When you plug it in, the camera should turn ON. If NOT, then press the
Power Buon Once to see if it turns ON. If it sll does NOT turn ON, then
remove the memory card.
3. Keep the camera plugged in. Now Press the RESET buon ONCE with a
pen’s p or a paper clip. Now the camera should turn ON. If it sll doesn’t
turn ON, then please CONTACT US.
Guys Please TRUST US on this. If your camera is freezing, lagging or does
NOT record video aer some seconds etc. while operang: Then it is the
Memory Card Issue. Either you are using the WRONG, FAKE or BAD
Memory Card. (Please be aware of the Fake Ones out there. If you have
purchased your memory card from eBay or any third party seller online
then it is most likely a fake one, even though it looks exactly real. Please
trust us. We have sold thousands of ROVE Dash Camera’s and they do NOT
lag, we stand by our prduct and we do extensive tesng. Some customers
simply thinks the camera is bad or not stable, but that is NOT the case
here. It’s the Memory Card Issue. Please CONTACT US and we are
dedicated in resolving this for you ASAP.
Please make sure the lens of camera is clean and there is no dirt on windshield
also. If the lens is out of focus, we are extremely sorry in advance. This can be a
manufacturing defect. Please send us an email with a screenshot or a sample
video so we can get this resolved for you ASAP.
To Next Page
Loading...
