LOOP RECORDING
OFF- 4GB MAX 1-MIN (Default), 3-MIN, 5-MIN, 10-MIN
This feature allows the camera to continuously record loop by
loop so it can delete the oldest video files automatically when the
memory card becomes full so you don’t have to manually delete
them. This feature will split each video file to an appropriate
length based on your selection.
OFF: When you choose off, the camera will continue to record each
file 4GB in size until the memory card becomes full and then it will
give you a “Card Full” message. It will NOT record any further until
you either delete files to make room or format the memory card.
The logic for the loop recording feature is designed as follows:
Let’s say the total capacity of the memory card is 100%. When the normal
+ event videos reach > 90%, the dash cam will start the loop recording.
The pre-allocation of directory space for normal and event videos is as
follows:
Normal Videos = 60%, Event Videos = 30%
If the number of event files is less than 30%, then the normal video files
can occupy the unused space of the event allocation until it reaches 90%,
and then the loop recording begins.
When more event (Locked) video files are present, the space of the event
directory is reserved for a maximum of 30%.
If the event video files reach their max allocation of 30%, then the camera
will also delete your oldest locked video to add that new latest event video.
Therefore it is important to understand that you can’t lock unlimited
videos to your memory card. If you lock any videos files that are important,
please note that even lock videos will be deleted similarly to the loop cycle
function with the oldest file first so if an event occurs and if your locked
video allocation is exhausted, to ensure proper room for a new locked
event video in case of a real event. We recommend that you download any
locked video ASAP to prevent it from being deleted.
46
USER MANUAL
To Next Page
Loading...
