VIDEO RECORDING G-SENSOR
While Video is Being Recorded:
In the event when G-Sensor is
triggered due to physical or gravitational impact force on the
camera, the current loop cycle length of the video file will be
locked so it will NOT be deleted by the normal loop cycle function.
G-Sensor is a 3-axis impact gravitational accelerometer which is
designed to detect physical and gravitational forces on the camera.
In the event of an accident please make sure you retrieve your
footage before using your camera again to prevent the loss of
important video files due to the loop cycle function, in case the
force was minor and did NOT trigger the G-Sensor to lock the
video file automatically. It is a best practice and recommended
to you to retrieve all necessary video footage after any event of
an accident before using your camera to prevent the loss of
vital video files.
WDR
Wide Dynamic Range (WDR) improves the exposure by taking
the combinations of over-exposed and under-exposed images
into one robust wide range of lighting with higher depth images.
ON (Default)
OFF
•
•
0.0 (Default)
-2, -1.7, -1.3, -1.0, -0.7, -0.3, 0.0, +0.3, +0.7, +1.0, +1.3, +1.7, +2
•
•
EXPOSURE
This feature allows you to adjust the brightness of a captured image.
47
To Next Page
Loading...
