11
Install the rear camera at the rear window. Before attaching the
rear camera in the rear windshield, thoroughly clean the rear
windshield using included cleaning wipe, and let it air dry.
12
Apply the static film to the rear windshield and use a credit
card to remove all the air bubbles.
NOTE:
If your vehicle have defroster lines in the back, pick a spot where those lines
are further away to create a strong bond. Rearly it is NOT possible to apply
electrostatic film successfully as some cars might have too rigid and closer
defroster lines, and in this case, the electrostatic film will NOT work for you.
Most of the time, this is not an issue, as many customers have already
applied electrostatic film over the defroster lines successfully.
22
USER MANUAL
To Next Page
Loading...
