•
•
To manually turn ON: Press and HOLD the power button for
approximately 10-12 Seconds until the camera turns ON.
To manually turn OFF: Press and hold the power button for
Approximately 4-5 Seconds until the camera turn OFF.
The best and faster way to turn the camera on/off is to just
plug/unplug the power cable.
•
Auto Power OFF: The camera is also pre-configured to save that
last video safely and turn itself OFF automatically within few
seconds when the power gets disconnected, i.e., when the car key
is turned to LOCK position.
•
TURNING ON/OFF YOUR CAMERA
Auto Power ON/OFF
Auto Power ON: ROVE R3 Dash Cam is designed to turn
ON and start recording automatically when it receives
power. i.e., when the car engine is started.
•
Some trucks/car’s 12V cigarette outlet is always HOT, which means it
provides constant power even when the car is turned OFF and LOCKED. If
this is the case for your vehicle, then the auto ON/OFF feature will not
work. And If you leave the camera continuously recording when the car is
turned off, then it will drain your car/truck’s battery and you might not
have enough power to start your car for next time. To Remedy this
situation, you can do one of the two option.
CAUTION:
Hardwire your dash cam to your car’s fuse box with ROVE’S 3-Lead
Auto Trigger Hardwire Kit.
Visit “
www.rovedashcam.com” to purchase one separately.
Change the connection in the fuse box for your 12V outlet to socket
which only supplies power when car key is turned to ACC or ON
position.
27
To Next Page
Loading...
