The firmware file is not sent to the camera over the wifi due to
a cellular data/connection issue.
I TRIED TO UPDATE THE FIRMWARE UPGRADE VIA APP,
WHY IS THE FIRMWARE UPDATE NOT STARTING AFTER
PRESSING PROCEED AS IT IS COMING TO THE
FIRMWARE POPUP AGAIN?
Turn OFF the 5G cellular/mobile data & then try upgrading the
firmware over the app; this should succeed. If still stuck on
firmware upgrade, restart the Camera by removing the power
to the R3 and supplying the power back. If none works, please
email customer care, and we can easily send you manual
firmware update instructions.
1
There could be FOUR possibilities:
The Main camera's not all the way slide in place with 3M
Sticky Mount.
You may have connected R3 to the direct USB of your car
instead of using ROVE's USB Car Charger.
The rear camera's 2.5mm Jack connector is not connected
properly.
WHY IS MY ROVE R3 REBOOTING WHEN EVERYTHING
IS SET AND CONNECTED PROPERLY?
2
1.
2.
3.
78
USER MANUAL
To Next Page
Loading...
