SHORTCUTS / FUNCTIONS
The camera comes with the default settings which allows you to start
using your camera right out of the box without changing any settings.
Make sure to format the memory card before first time use.
INSTALLATION
1
First, turn OFF the car's engine.
Measure and decide the applicable installation area using the
dash cam’s view finder before you start installing the dash
cam. Look at the front + cabin camera’s video location by
temporarily holding the dash cam on the windshield and
make sure you like the installation spot of your choice before
proceeding. Most people installed their ROVE R3 next to the
rearview mirror and opposite side from the driver.
2
We strongly suggest that you use the included electrostatic film
before placing the sticky mount on your car's windshield. Electro-
static film is designed to give you a clean removal of your 3M sticky
mount. If you ever need to remove the 3M Mount, then you can
simply peel off the electrostatic film off the windshield for an easy
and clean removal.
Why use electrostatic film?
17
To Next Page
Loading...
