ROVE R3 - Advanced Features and Troubleshooting; Parking Mode and Special Features

Collision Detection Only
Time_Lapse + Collision Detection
OFF
PARKING MODE
Back
Video Setting
System Setting
PARKING MODE
Never connect the dash cam directly to your car’s 12/24V battery by
modifying wires. The dash cam is not designed to handle direct current
from the battery. It needs a step-down circuit in the middle (Hardwire Kit)
to adjust the current required by the dash cam. You must connect the dash
cam using the ROVE’s 3-Lead Hardwire Kit and connect it to the car’s fuse
box (NOT to battery terminals directly).
CAUTION:
NOTE:
The camera has a built in temperature sensor. During sunny afternoon
and direct sunlight with locked car, the inside of the car turns into a
greenhouse effect, and depend on your geographical location the
temperature can exceed the recommended guidelines for this product.
When this happens, the camera will automatically shut down to prevent
damage to the unit. (See pg. 14 for temperature guidelines)
ROVE has custom designed it's parking monitor for best user
experience and automation. Please see the details below.
51