Cruise Control
113
2
To increase the set cruising speed
Lift and hold the ‘SET+’ switch - the car will accelerate
automatically. Release the switch as soon as the desired speed has
been reached.
Alternatively, the set speed can be increased incrementally by
‘tapping’ the ‘SET+’ switch. Each operation of the switch will
increase the speed by approximately 1.5 km/h.
Disengaging cruise control
Cruise control will automatically disengage if the brake or clutch
pedals are depressed, or if ‘N’ (neutral) is selected on an automatic
gearbox. Cruise control can also be disengaged by operating the
‘RES’ switch.
To re-engage cruise control at the previously set speed, operate the
‘RES’ switch.
To Next Page
Loading...
