250
Bulb Replacement
SIDE REPEATER LIGHTS
Replacement bulb: 5 watt (amber).
Push the lens firmly towards the front of the car to release the light
unit, then withdraw the light from the wing.
Twist anti-clockwise to release the bulb holder from the light unit.
Pull to remove the bulb from its socket.
When refitting the light unit, first locate the two tabs (arrowed in
illustration), ensuring that they are pointing towards the rear of the
car, then push the remainder of the light unit into the aperture.
GLOVEBOX LIGHT
Replacement bulb: 5 watt.
Insert a small flat-bladed screwdriver (preferably with a short
handle, due to limited access) into the indent on the left hand side
of the light unit, and carefully prise the unit from the glovebox
panel. Remove the bulb from its clips.
H2701
H2784
To Next Page
Loading...
